The rotational molding process is to first add plastic raw materials into the mold, and then the mold is continuously rotated along two vertical axes and heated, so that the plastic raw materials in the mold are gradually and uniformly coated under the action of gravity and thermal energy. It is melted and adhered to the entire surface of the cavity, formed into the desired shape, and then cooled to shape and demolded to obtain a product.

The output of rotomolding products is relatively high, mainly with the help of rotomolding molds. Just like when we make biscuits, we put the material into each mold and bake it into a shape. As long as the mold is complete and the temperature is well controlled , the finished product is generally without any problems, and the cost is still small. Yingchuang rotomolding equipment products are all products manufactured by rotomolding process. Rotational molding, also known as rotational molding, rotational molding, rotary molding, etc., is a thermoplastic hollow molding method. In the manufacturing process, the plastic raw material is added into the mold, and then the mold is continuously rotated along two vertical axes and heated, and the plastic raw material in the mold is gradually uniformly coated and melted and adhered to the mold cavity under the action of gravity and thermal energy. On the entire surface of the product, it is formed into the desired shape, and then cooled to form a product.

Rotomolding products - military box rotomolding products have good edge strength, and rotomolding can achieve a thickness of more than 5 mm at the edge of the product, solving the problem of thin edges of hollow products. Various inlays can be placed, the shape can be complex, and the thickness can exceed 5 mm, it can produce fully enclosed products, and can be filled with foam materials to achieve thermal insulation. There is no need to adjust the mold, and the wall thickness of the rotomolded product can be adjusted freely. Since the various parts in the production process of rotomolding products are finally formed under the high temperature and rotation process, unlike those formed under heavy pressure, the rotomolding mold does not need to go through the same process as the injection molding process. Special processing can withstand the test of heavy pressure.