The rotomolding machine is suitable for producing hollow parts of various complex shapes. During the whole process of roll forming, the raw materials are slowly coated and accumulated on the inner surface of the mold, and the product has a strong working ability to copy the fine structure. For example, the pattern design on the mold core, because the mold will not be harmed by environmental pressure during the entire forming process, it can be immediately used to make molds with detailed structures and complex appearances.

The rotomolding product saves raw materials, the wall thickness is relatively uniform, and the rounded corners are slightly thicker. The efficiency of making full use of raw materials is high, which is beneficial to saving raw materials. In the whole process of rotomolding, there will be no consumption of runners, glue inlets, etc. , After the adjustment is carried out, there is basically no return waste in the production process, so the utilization rate of raw materials by this processing technology is very high.

The quality of the rotomolding machine is not considered based on the price. A good rotomolding machine is not only a simple composition of automation technology, but also involves the technical and software development of the rotomolding process. The rotomolding process involves the raw materials and molds of the rotomolding products. After a variety of conditions, create the relevant heating speed, heating time and rate settings.

The selection of raw materials and the heat treatment process are very important. Immediately related to the service life of the rotomolding equipment, some of the transmission system components operate under high temperature, low speed and long-term load conditions. The alternation of cold and heat will cause some components to deform and cause common Fault.

1. The structure is reasonable and the equipment is light. The overall scheme design is simple, reasonable layout, dexterity, and load.

2. During the production process of the heating room, the temperature is uniform, the warm air product flow channel is smooth, and the calorific value is evenly distributed. Except for the vents, there are no high temperature and ultra-low temperature in some areas, especially the temperature blind area.

3. Rapid heating of the heating chamber can achieve the rated temperature in a short period of time, indicating high thermal efficiency and high manufacturing efficiency.

4. Temperature control can achieve precise temperature control, which is of key practical significance for the production of rotomolded products with materials with a small processing temperature range. When the airtight thermal insulation equipment is operating, the outdoor surface will not heat up when it is heated, and it will not immediately contact the transmission gear. co-operate.

Rotomolding equipment

5. Comprehensive energy efficiency Each type of motor and combustion engine consumes less power and energy, and the same commodity consumes less power and energy, and has higher energy efficiency. The mobile phone software is equipped with machine equipment and processing technology. The actual operation program interface is clear, the actual operation is simple, the control force is strong, and the reliability is high.